T. 01794 519900 | E. info@airia.co.uk

0
  • No products in the cart.
Total:£0.00

GA 5 – 11 (kw) Compressors

Home > New Compressed Air Equipment  > Atlas Copco GA Compressors > GA 5 – 11 (kw) Compressors

Atlas Copco GA 5 - 11 (kw) Compressors

GA 5-11 kw Oil Injected Roatary Screw Compressors

The GA5-11 oil injected screw air compressors, available in 5kW, 7kW and 11kW, provide an energy efficient, reliable workplace air compressor that minimizes the total cost of ownership. These air compressors are designed to withstand the harshest of environments while providing you with a quiet air compressor with sound levels ranging between 60 and 62 dB(A). The GA5-11 series are designed and manufactured in accordance with ISO 9001, ISO 14001 and ISO 1217 which insures a reliable trouble free air compressor. Additionally these units boast a very compact footprint and utilize the next generation Elektronikon® controller that offers you a great variety of control and monitoring features that allow you to increase you compressor’s efficiency and reliability. As standard these units are designed to operate in 46°C/115°F ambient conditions and are available as a stand-alone compressor (Pack) or including an integrated dryer (Full Feature).

ga5 11 ga5 11 2

The GA5-11 air compressors are available in 5kW, 7kW and 11kW variants with flows ranging from 8.4 to 30.7 l/s (24.7 to 54.8 cfm).

 

The Pack (stand alone) compressors are constructed with the following major components:

  • State of the art compression element
  • IP55 (TEFC) motor meeting or exceeding IEEE and NEMA Premium efficiency standards with greased for life bearings
  • Elektronikon® controller
  • High efficiency aftercooler
  • Moisture separator
  • Inlet air filter

Additionally the Full Feature includes an integrated refrigerated air dryer using environmentally friendly R134a refrigerant

The GA5-11 Air Compressors consist of the following:

1.1 Air / Oil Flow

Air is drawn in through the air filter and the inlet valve into the compression element. This compressed air is forced through the air/oil separator, past the minimum pressure valve and into the after-cooler through the water separator to the discharge. In the case of a Full Feature unit the air will then circulate through the refrigerated dryer and then to the discharge.

air oil flow

1.2 Cooling Systemcooling system ga5 11

After the cooler an integrated water separator is installed, for a supply of cool compressed air free of liquid condensate to protect you production system.

1.3 Oil Separator System, Oil Filter and Consumables

High efficiency 2 step air oil separator system for reduced oil consumption ensoil serparator ga5 11uring low maintenance costs and good oil sepatarion result in between 2 service intervals.

 

The oil filter cleans the oil continuously from particles bigger than 25 micron with 99% efficiency in order to protect the lubrication quality and health of the rotating components.

1.4 Electrical/Control System

Reduced cubicle temperatures, by forced air ventilation through the cubicle, eletrical control system ga5 11doubles the lifetime of the electrical components and keeps the unit up and running even in the harshest conditions. Standard all units run without de-rating up to 46°C. Optionally high ambient versions are available for 50°C, on FF variants, and 55°C pack variants.

1.5 Air Dryer (Full-Feature models)

The integrated dryer efficiently removes moisture, aerosols and dirt particles to air dryer ga5 11protect your investment. This quality air expands the life of equipment, increasing efficiency and ensuring quality in your final product.

 

Pressure dew point at 3°C /37°F at maximum FAD. (100% relative humidity at 20°C/68°F)

 

Can be outfitted with optional DD and PD filters, allowing you to obtain the exact air quality you need for your specific application.

2 ELEKTRONIKON®

Elektronikon® MK5 regulator and control panel Display

elektronikon ga5 11

The Elektronikon® standard is offered as standard for the GA 5-11 for fixed speed compressors with online visualization. Elektronikon® standard controls and monitors the key compressor parameters efficiently as stated below.

 

GA 5-11 compressors are equipped with the power conscious, efficient, automatic full-load / no-load regulation system. The Elektronikon® regulation is equipped with the delayed second stop feature (DSS) for the main motor which significantly cuts the electricity cost

 

The regulating system includes the Elektronikon® Standard module to regulate, control and monitor compressor operation. All GA 5-11 series Elektronikon® control modules display and monitor the following:

  • 1. Compressor Status Indication Voltage on (LED indication)
  • 2. Temperature, numerical readouts
  • 3. Pressure, numerical readouts
  • 4. Compressor Control
  • 5. Hourmeters
  • 6. Service requirement indications
  • 7. Compressor safety – warning indications
  • 8. Compressor safety – shutdown indications
  • 9. Digital output relays for remote monitoring (voltage free)
  • 10. Optional upgradable to Elektronikon® graphic without rewiring
  • 11. Option energy saving through integrated multi compressor control (Elektronikon® Graphic only)
  • Compressor loaded
  • Compressor unloaded
  • Compressor maximum allowed unloading pressure
  • Automatic operation (LED indication)
  • General warning/alarm (LED indication)
  • Service required (LED indication)
  • Delivery air
  • Ambient air temperature
  • Delivery air
  • Start / Stop
  • Emergency stop
  • Reset / Test
  • Total running hours
  • Total loading hours
  • Air filter
  • Oil filter
  • Oil lifetime
  • Oil separator
  • High dew point temperature
  • Sensor error
  • High element outlet temp.
  • Drive motor/fan motor overload
  • Emergency stop
  • Remote start and stop
  • Optional upgradable to Elektronikon® graphic without rewiring
  • ES4i (up to 4 compressors)
  • ES6i (up to 6 compressors)

3 FEATURES & BENEFITS

no image

Our work is guaranteed and customer service is always of the highest standard; why not try us today?